The "Equator" gas fired radiant patio heater is available in Propane or Natural gas and can be wall mounted or post mounted.
The new attractive Equator hi intensity infra-red heater will increase the use and enjoyment of outdoor areas. The warm and red glow of radiant heat attracts people to the outdoor area on cool days and evenings, times when the patio might otherwise be empty. The streamlined design blends in well with most any decor. Equator heaters are easily mounted on outdoor walls, under ceilings and on posts under awnings.
The Equator heaters are effective in heating outdoor spaces because they utilize infrared or radiant heat. Infrared energy is the same type of energy we get from the sun. Infrared energy warms people and objects without heating the intervening air. Unlike the sun, "The Equator" heaters do not produce Ultraviolet (UV) rays that can be harmful. Infrared energy travels by line-of-sight so the designer must be aware that doors, panels or windows may obstruct the infrared energy from reaching the desired location. Overlapping infrared patterns from numerous heaters may be used effectively to provide even heat distribution. Because infrared heaters heat people and objects, and thermostats measure air temperature, a thermostat may not be the best method for controlling outdoor heaters. Where multiple heaters are used, it is suggested that they be switched independently, so as to allow for flexibility in heating larger areas as the space becomes more occupied. A timer is a good method to ensure that all heaters are turned off when the patio is not being used.
Features
30,000/40,000 BTUs/hour, single or two-stage input
Direct spark ignition, no standing pilot
Natural or propane gas
24 volt control
120/24 volt transformer included
Weatherproof aluminized, baked on, high temperature, black powder enclosure or stainless steel enclosure
Decorative safety grill
Windproof up to 15 mph
100% safety shut off
Slim profile
Accessories
Wall and ceiling mounting brackets
Mounting brackets for 4 x 4 wooden posts
Mounting brackets for 3" round steel post
Hand-held remote control available
MODEL #
FUEL
BTU INPUT
DESCRIPTION
HI-30-N
NAT GAS
30,000
Black Hi Temp powder coated aluminized steel Single Stage
HI-40-N
NAT GAS
40,000
Black Hi Temp powder coated aluminized steel Single Stage
HI-30NS
NAT GAS
30,000
Stainless Steel Single Stage
HI-40NS
NAT GAS
40,000
Stainless Steel Single Stage
HI-40N2
NAT GAS
30/40mbtu
Black Hi Temp powder coated aluminized steel Two-Stage
HI-40NS2
NAT GAS
30/40mbtu
Stainless Steel Two-Stage
HI-30-P
PROPANE
30,000
Black Hi Temp powder coated aluminized steel Single Stage
HI-40-P
PROPANE
40,000
Black Hi Temp powder coated aluminized steel Single Stage
HI-30PS
PROPANE
30,000
Stainless Steel Single Stage
HI-40PS
PROPANE
40,000
Stainless Steel Single Stage
HI-40P2
PROPANE
30/40mbtu
Black Hi Temp powder coated aluminized steel Two-Stage
HI-40PS2
PROPANE
30/40mbtu
Stainless Steel Two-Stage
PART #
DESCRIPTION
HI-RX11
Hand-held Remote
HI-RX1R
Factory Installed Receiver for Hand-held Remote
HI-WALL
Wall/Ceiling Mounting Bracket, Horizontal or up to 45 degree angle mounting
HI-WOOD
Wooden Post Mounting Bracket 4 x 4 or larger
HI-POST
3" diameter Steel Post Mounting Bracket
HI-10FT
3" diameter Aluminized Steel Post 10 ft with gas supply access slot at the bottom
PH-108B
Inground post for 3" diameter steel post for underground gas supply
PH-121B
Black Base Mount "T" for 3" diameter post (bolts to deck or cement pad)
